Industrial Equipment
Replacement parts, tooling, and custom hardware that keep equipment running.
When off-the-shelf will not work, MASA FabWorks manufactures custom manifolds, valve bodies, shafts, housings, and enclosures for machinery, drives, and fluid-handling equipment. No minimum-order constraints, just parts that fit your process and your machines.
4
Processes
±0.02 mm / 0.0008 in
Tolerance to
Steel / Al / brass
Metals
1–5k+
Piece volumes
Engineering depth for industrial equipment programs
Cast-in thermal and structural features
Aluminum die castings conduct heat well, so cooling fins, ribs, and mounting features can be cast directly into drive and controller housings rather than machined or bonded on.
Built for the operating environment
Enclosures are specified with ingress protection, gasket grooves, and finishes such as powder coat, anodize, and passivation for coolant, dust, and washdown exposure.
Wear parts and fixtures on demand
Shafts, bushings, and custom fixtures are machined in tool steel, bronze, and UHMW, or printed in nylon, to keep production lines moving without long lead times.
Industrial Equipment parts, by process
Representative parts we manufacture for this industry. Every part is quoted to your drawings and materials.
CNC Machining
Machining produces valve bodies, manifolds, and shafts in steel, aluminum, and brass to tight tolerances.
Explore CNC Machining services
Valve body
Machined brass, ported
Hydraulic manifold
Machined steel, ported
Drive shaft
Turned and ground steel
Sheet Metal Fabrication
Fabrication delivers machine guards and drive enclosures in steel and aluminum, welded and finished.
Explore Sheet Metal Fabrication services
Machine guard
Laser-cut folded steel
Drive enclosure
Folded steel, louvered
Die Casting
Die casting produces gearbox and pump housings with integral cooling features at volume.
Explore Die Casting services
Gearbox housing
Cast and machined aluminum
Pump body
Cast aluminum, machined faces
3D Printing
Additive turns around wear parts and custom jigs in engineering nylons with no tooling.
Explore 3D Printing services
Assembly fixture
SLS nylon
Where we help most
Common material grades
Steels
- Mild steel
- Stainless 304 / 316
- Tool steel
Aluminum
- 6061-T6
- Cast aluminum
- ADC12
Other metals
- Brass
- Bronze
Plastics
- UHMW
- Nylon
- SLS PA12
Standards & responsibility
ISO 9001 quality systems are held by the manufacturing facilities. FabWorks supplies custom components and hardware; machine-level certification remains owned by your team.
Related technical guides
Design-for-manufacturability guides and references most relevant to industrial equipment parts.
Designing for CNC Machining: A DFM Guide
The design rules that matter most for CNC milling and turning, with the numbers we use and why: walls, radii, pockets, holes, tolerances, and finish.
Read the guideDesigning for Sheet Metal Fabrication: A DFM Guide
Bend radius, flange length, hole placement, K-factor, cut methods, and tolerances for sheet metal parts, with the numbers we use, keyed to material thickness.
Read the guideMaterials Selection Reference: Alloys and Resins
The metal and plastic families we work in, the properties that separate them, and how to narrow from a family to a grade that both performs and manufactures cleanly.
Read the guideGD&T, Tolerances, and Fits: A Primer
General tolerances, the GD&T controls and feature control frame, material condition and bonus tolerance, and how to choose an ISO 286 fit, with achievable bands by process.
Read the guideThreads, Inserts, and Fastening
Cut threads vs thread-milling, minimum thread engagement, and when to use heat-set, press-fit, or self-clinching inserts so a joint holds and survives reassembly.
Read the guideStart a industrial equipment project
Upload your files. We measure your model against per-process, per-material rules and send a DFM review before you commit to a quote.