Industries

Medical

Component and prototype supply for diagnostic, lab, and handheld device programs.

Medical device teams use MASA FabWorks for machined instrument components, molded enclosures, fluidic manifolds, and single-use fixtures. We manufacture to your drawings and specifications; device classification, biocompatibility validation, and regulatory clearance stay with your team. Resins and metals can be specified to meet the standards your device requires.

4

Processes

±0.025 mm / 0.001 in

Tolerance to

316L / PEEK

Device-grade metals & resins

None

Minimum order

Group of medical device components
How We Serve

Engineering depth for medical programs

01

Materials matched to sterilization

Autoclave, EtO, and gamma each favor different materials. Repeated steam sterilization suits 316L and 17-4PH stainless and PEEK; polymer choice follows the sterilization route your device uses.

02

Cleanable, corrosion-resistant surfaces

Stainless instrument components are passivated to ASTM A967 and finished to a low surface roughness so there are no crevices for biofilm, which matters for reprocessed instruments.

03

Biocompatibility is specified, not assumed

We can mold and machine in resins that can be specified to meet ISO 10993 or USP Class VI requirements. Testing and validation of the finished device remain owned by your quality team.

04

Prototype and pilot builds, inspected to your drawing

From first prototypes to pilot builds, every part is inspected against your drawing, with an inspection report posted to your project, ready for your incoming inspection. There is no minimum order, so a handful of prototype parts is fine.

See how an order runs
What We Make

Medical parts, by process

Representative parts we manufacture for this industry. Every part is quoted to your drawings and materials.

CNC Machining

Machining gives instrument-grade tolerances and finishes in stainless, titanium, PEEK, and acrylic, for instruments, bone plates, and fluidic blocks.

Explore CNC Machining services
Machined stainless-steel surgical instrument

Surgical instrument

Machined 316L stainless, passivated

Machined stainless-steel surgical handpiece body

Surgical handpiece

Machined stainless steel

Transparent acrylic fluidic manifold

Fluidic manifold

Machined acrylic, polished ports

Injection Molding

Molding delivers cosmetic device enclosures, handheld housings, and connector bodies in PC, ABS, and PC/ABS with clean Class-A surfaces.

Explore Injection Molding services
Molded white medical device enclosure

Device enclosure

Injection-molded polycarbonate

Molded handheld medical device housing

Handheld housing

Injection-molded PC/ABS

Molded medical device connector housing

Connector housing

Injection-molded, fluid ports

Injection-molded clear diagnostic test cartridge

Diagnostic cartridge

Molded clear polycarbonate, fluidic channels

Injection-molded benchtop diagnostic reader housing

Diagnostic reader housing

Molded PC/ABS, two-piece

Sheet Metal Fabrication

Fabrication produces stainless trays and cases that passivate cleanly for lab and sterilization environments.

Explore Sheet Metal Fabrication services
Perforated stainless-steel instrument tray

Instrument tray

Perforated stainless sheet

Folded stainless-steel sterilization case

Sterilization case

Folded stainless, latched

3D Printing

Additive covers patient-specific surgical guides and pre-surgical models in biocompatible photopolymers and resin, with no tooling.

Explore 3D Printing services
3D-printed surgical guide

Surgical guide

SLA resin, single-use

Applications

Where we help most

Surgical instrumentsDiagnostic & lab equipmentDiagnostic cartridge & reader hardwareSurgical-robot structures & mechanisms (non-implant)Rehab & mobility devicesHandheld & wearable devicesFluidic & connector componentsEnclosures & housingsFixtures & surgical guides
Materials

Common material grades

Stainless & titanium

  • 316L
  • 17-4PH
  • Ti-6Al-4V

Engineering plastics

  • PEEK
  • PC
  • PMMA
  • POM

Molding resins

  • PC/ABS
  • ABS
  • Silicone overmold

Additive

  • SLA resin
  • SLS PA12
Quality

Standards & responsibility

Quality systems such as ISO 13485 are held by the manufacturing facilities. FabWorks supplies components and prototypes; device classification, biocompatibility validation, and regulatory clearance remain owned by your team.

Get Started

Start a medical project

Upload your files. We measure your model against per-process, per-material rules and send a DFM review before you commit to a quote.